[Avender00]

Boot install: (Could do with a vacuum in the boot) everything was drilled in... Subs drilled in from underneath, amp was done from above. still not complete tho.. need something more....

http://i48.photobucket.com/albums/f226/Avender001/Cars/My%20Supra/Boot%20Install/5MDFLiningitupintheboot.jpg

- Made a template to the size of my boot.

http://i48.photobucket.com/albums/f226/Avender001/Cars/My%20Supra/Boot%20Install/7Cutatemplatetobootsize002.jpg

- Draw it up on the sheet of MDF board.

http://i48.photobucket.com/albums/f226/Avender001/Cars/My%20Supra/Boot%20Install/8DrawnupontheMDFboard.jpg

- Cut the shape out [ alot more even then the dodgy template :P ]

http://i48.photobucket.com/albums/f226/Avender001/Cars/My%20Supra/Boot%20Install/9aCuttobootsize.jpg

- And installed with all the wiring down underneath the carpet and mdf board. Subs are Drilled in from underneath and the amp was done from above.. More to come guys :-)

http://i48.photobucket.com/albums/f226/Avender001/Cars/My%20Supra/Boot%20Install/11CompleteBoot002.jpg

http://i48.photobucket.com/albums/f226/Avender001/Cars/My%20Supra/Boot%20Install/12CompleteBoot003.jpg

http://i48.photobucket.com/albums/f226/Avender001/Cars/My%20Supra/Boot%20Install/13CompleteBoot004.jpg

http://i48.photobucket.com/albums/f226/Avender001/Cars/My%20Supra/Boot%20Install/14Amp.jpg

http://i48.photobucket.com/albums/f226/Avender001/Cars/My%20Supra/Boot%20Install/15Sub-CadenceBABY.jpg

[Mod's please move this to the correct section, wont let me]

This post has been edited by Avender00: 18 October 2009 - 10:32 PM

[Mikey]

looks good, but i would personally keep that vinyl shutter in the boot that u can pull over and cover the subs and amp. would look sleeker that way and still be sounding pleasant enough for you to enjoy ;) just make sure the sub doesn't slap again the cover, else screw on some fancy self taping bolts around each sub to act like a "tent stand"